Effect of nano-MgO on mechanical performance of cement stabilized silty clay     

Kai Yao  Dongliang An  Na Li  Chen Zhang  Aizhao Zhou 《Marine Georesources & Geotechnology》2020,38(2):250-255

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.  相似文献   

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings     

Santosh Kumar Yadav  Guan-lin Ye  Usama Khalid 《Marine Georesources & Geotechnology》2020,38(4):400-416

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.  相似文献   

沉积物中硬质粘土层的研究进展          下载免费PDF全文

孔凡彪  徐树建  贾广菊 《山东国土资源》2018,34(3)

大量的钻孔资料表明,平原地区及其海域沉积物中普遍有硬质粘土层的存在。硬质粘土层在工程地质、地理学研究等方面具有重要的价值,它不仅是高层建筑的持力层,而且是研究全球环境变化事件、古气候演变的良好载体。该文阐述了硬质粘土层的一般特征、成因以及在粒度、地球化学元素、年代学、沉积环境等方面的研究进展,并展望了硬质粘土层在年代、物质来源和沉积环境等方面的研究方向,认为黄河三角洲硬质粘土层研究较少,需要开展大范围的、系统深入的、多学科的宏观和微观综合分析,挖掘硬质粘土层蕴含的古环境意义和应用价值。  相似文献   

Calibration method affects the measured δ2H and δ18O in soil water by direct H2Oliquid–H2Ovapour equilibration with laser spectroscopy     

Hongxiu Wang  Bingcheng Si  Dyan Pratt  Han Li  Xiaojun Ma 《水文研究》2020,34(2):506-516

The direct H₂O_liquid–H₂O_vapour equilibration method utilizing laser spectroscopy (DVE-LS) is a way to measure soil pore water stable isotopes. Various equilibration times and calibration methods have been used in DVE-LS. Yet little is known about their effects on the accuracy of the obtained isotope values. The objective of this study was to evaluate how equilibration time and calibration methods affect the accuracy of DVE-LS. We did both spiking and field soil experiments. For the spiking experiment, we applied DVE-LS to four soils of different textures, each of which was subjected to five water contents and six equilibration times. For the field soil experiment, we applied three calibration methods for DVE-LS to two field soil profiles, and the results were compared with cryogenic vacuum distillation (CVD)-LS. Results showed that DVE-LS demonstrated higher δ²H and δ¹⁸O as equilibration time increased, but 12 to 24 hr could be used as optimal equilibration time. For field soil samples, DVE-LS with liquid waters as standards led to significantly higher δ²H and δ¹⁸O than CVD-LS, with root mean square error (RMSE) of 8.06‰ for δ²H and 0.98‰ for δ¹⁸O. Calibration with soil texture reduced RMSE to 3.53‰ and 0.72‰ for δ²H and δ¹⁸O, respectively. Further, calibration with both soil texture and water content decreased RMSE to 3.10‰ for δ²H and 0.73‰ for δ¹⁸O. Our findings conclude that the calibration method applied may affect the measured soil water isotope values from DVE-LS.  相似文献   

Bound and mobile soil water isotope ratios are affected by soil texture and mineralogy,whereas extraction method influences their measurement     

Rachel E. Adams  Ayumi Hyodo  Toby SantaMaria  Cynthia L. Wright  Thomas W. Boutton  Jason B. West 《水文研究》2020,34(4):991-1003

Questions persist about interpreting isotope ratios of bound and mobile soil water pools, particularly relative to clay content and extraction conditions. Interactions between pools and resulting extracted water isotope composition are presumably related to soil texture, yet few studies have manipulated the bound pool to understand its influence on soil water processes. Using a series of drying and spiking experiments, we effectively labelled bound and mobile water pools in soils with varying clay content. Soils were first vacuum dried to remove residual water, which was then replaced with heavy isotope-enriched water prior to oven drying and spiking with heavy isotope-depleted water. Water was extracted via centrifugation or cryogenic vacuum distillation (at four temperatures) and analysed for oxygen and hydrogen isotope ratios via isotope ratio mass spectrometry. Water from centrifuged samples fell along a mixing line between the two added waters but was more enriched in heavy isotopes than the depleted label, demonstrating that despite oven drying, a residual pool remains and mixes with the mobile water. Soils with higher clay + silt content appeared to have a larger bound pool. Water from vacuum distillation samples have a significant temperature effect, with high temperature extractions yielding progressively more heavy isotope-enriched values, suggesting that Rayleigh fractionation occurred at low temperatures in the vacuum line. By distinctly labelling bound and mobile soil water pools, we detected interactions between the two that were dependent on soil texture. Although neither extraction method appeared to completely extract the combined bound and mobile (total water) pool, centrifugation and high temperature cryogenic vacuum distillations were comparable for both δ²H and δ¹⁸O of soil water isotope ratios.  相似文献   

华北克拉通南缘石炭系本溪组铁-铝黏土矿物质来源: 以河南三门峡大安铝黏土矿床为例^*          下载免费PDF全文

刘学飞  王庆飞  马遥  李中明  赵利华  周智慧  刘百顺  马欣莉 《古地理学报》2020,22(5):965-976

华北克拉通在中奥陶世至晚石炭世期间一直出露地表,经历了长期的风化作用,形成大规模的铁-铝黏土矿,其成矿物源一直是研究的热点,尤其是本溪组底部铁矿和铁质黏土矿与上部铝黏土矿是否为同一来源尚未查清。本研究选取克拉通南缘大安铝黏土矿床作为研究对象,展开微区矿物及元素地球化学组成分析,进一步探讨铁-铝黏土矿物质来源。大安矿床内含矿岩系自下而上包括铁质黏土岩、铝土矿、铝质黏土矿;局部喀斯特高地缺失铝土矿,铝质黏土矿直接覆盖于铁质黏土岩之上。铁质黏土岩在洼地以菱铁矿、黄铁矿和伊利石为主,在隆起区以赤铁矿、伊利石和高岭石为主。铝土矿以硬水铝石、伊利石和锐钛矿为主;铝质黏土矿主要矿物为伊利石。矿物微区分析在黏土矿底部发现大量的碳化硅和少量自然硅、硅铁矿、铬铁矿;区域对比揭示北秦岭造山带内商丹缝合带和二郎坪群中的蛇绿岩为铝黏土矿形成提供了成矿物质。本溪组底部铁质黏土与上部铝黏土矿稳定元素比率(例如Zr/TiO₂、Hf/TiO₂、Nb/TiO₂、Ta/TiO₂)存在明显差异,揭示二者为不同来源: 底部铁质黏土岩和铁矿层为底板碳酸盐岩原地风化的产物;而上部铝黏土矿是异地搬运物,北秦岭造山带在晚石炭世的整体抬升为华北铝黏土矿形成提供了重要的成矿物质。  相似文献   

莱州湾表层沉积物粒度和黏土矿物分布特征与运移趋势分析     

冯利  冯秀丽  宋湦  肖晓  田动会 《海洋科学》2018,42(2):1-9

运用粒度参数分析、黏土矿物含量分析、Flemming三角图示法和Gao-Collins二维的"粒度趋势分析"等方法,对采自莱州湾海域的表层沉积物样品和黏土矿物样品进行分析,了解了该研究区域的沉积环境及沉积物的运移趋势。研究区由岸向海沉积物类型大致依次为砂-粉砂质砂-砂质粉砂-粉砂-黏土质粉砂,并且研究区表层沉积物在近岸区域呈现较为明显的平行岸线的条带状特征;同时沉积物的平均粒径、分选系数、偏态、峰态等粒度参数也呈现出良好的正相关性或负相关性;研究区黏土矿物为伊利石、蒙脱石、绿泥石、高岭石,除伊利石分布大致为黄河三角洲近岸低,向研究区东北方向逐渐升高外,其余的黏土矿物都表现出了近岸高,远海低的分布特征,且主要物源为黄河物质输入。Flemming三角图研究区所有采样点大部分分布在Ⅱ区,少部分分布在Ⅲ区,说明研究区整体水动力较强;采样点在A—E区均有分布,但在C、D两区分布最多,说明研究区沉积物粒径较集中。研究区表层沉积物整体呈由岸向海输运的趋势,具体来看,黄河沉积物入海后向北、向东、向南运移,研究区内沉积物的来源是黄河输沙以及周围入海的小河流的输沙和沿岸冲刷的物质。  相似文献   

西准噶尔白杨河铍铀矿床中铍与铀成生关系初探——来自围岩蚀变和矿石矿物接触关系的证据     

刘畅 《地质与勘探》2020,56(3):465-477

与高硅富氟火成岩(流纹岩或花岗斑岩)有关的铍矿床中常伴有铀矿化,其成矿特色明显,是认识岩浆-岩浆热液-热液演化过程中铍与铀地球化学行为异同的理想对象,但其中铍与铀成矿的时空关系及成因关系尚不清楚。为了理解该类矿床中铍与铀的成生关系,并为区域内铍与铀的找矿勘查提供理论支撑,本文选取该类矿床的典型代表—西准噶尔白杨河铍铀矿床为研究对象,通过镜下观察、扫描电镜能谱和激光拉曼光谱分析,对矿区内单铍矿石、单铀矿石和铍铀矿石开展了系统的岩相和矿相学研究。结果显示,与铍矿化相关的围岩蚀变为钠长石化、电气石化、白云母化、萤石化、碳酸盐化和绿泥石化,与铀矿化相关的围岩蚀变为硅化、赤铁矿化、萤石化、伊利石化和锰矿化(含少量铅),且铍铀矿石中可见沥青铀矿切穿羟硅铍石的现象。结合铍与铀的地球化学行为和前人研究成果,认为白杨河铍铀矿床中铍矿化与铀矿化应是不同期热液作用的结果:铍矿化可能是花岗斑岩深部岩浆房分异的岩浆热液在不断演化过程中形成的,而铀矿化可能与后期流体(如幔源流体、加热循环的大气降水等)的淋滤作用有关。  相似文献   

大洋多金属结核中铁锰质矿物拉曼光谱特征初探     

赖佩欣  任江波  邓剑锋 《矿床地质》2020,39(1):126-134

拉曼光谱是一种快速无损的分析手段,它既可观察样品的显微结构构造,也可分析样品的成分和结构。为了丰富多金属结核的岩石矿物学特征,文章对西太平洋某海山区的多金属结核样品进行了X射线粉末衍射分析和拉曼光谱分析。X射线分析结果显示该区域样品主要含有水羟锰矿、钡镁锰矿、斜长石、钙十字沸石和石英,显微构造主要有纹层状构造、柱状构造、树枝状构造、充填构造等。通过分析对比潮湿样品和烘干样品铁锰质矿物的拉曼特征谱峰,得出结核中水羟锰矿的特征谱峰位于490 cm~(-1)、570 cm~(-1)和626 cm~(-1)附近,钡镁锰矿的特征谱峰则位于640 cm~(-1)附近,与陆地上对应矿物的特征拉曼谱峰不同。结核中的钡镁锰矿结构不稳定,经过风干或者抛磨后部分产生相变,不同显微结构中,相变情况不同。经与RRUFF数据库比对,识别出钙十字沸石、斜长石等自形晶,多分布于结核最内层,往结核外层总体减少。矿物微晶多见铁锰质矿物微晶和钙十字沸石微晶,铁锰质矿物绕其向外生长。  相似文献   

末次冰消期（1.9万年）以来冲绳海槽中部黏土矿物来源及其环境响应          下载免费PDF全文

田旭  胡邦琦  王飞飞  黄威  丁雪  宋维宇  徐方建 《中国地质》2020,47(5):1501-1511

基于采自冲绳海槽中部的CS2站柱状沉积物黏土矿物和AMS¹⁴C年代分析，探讨了末次冰消期以来冲绳海槽中部黏土矿物的物质来源及其环境指示意义。结果显示，CS2站黏土矿物以伊利石为主，其次为绿泥石，高岭石和蒙脱石含量较少。根据黏土矿物分布趋势变化，CS2站柱状沉积物可划分为3个阶段：阶段（I 19~12 ka BP）和阶段Ⅱ （12~8 ka BP）期间沉积物主要来源于长江，台湾和黄河物质也有一定影响，其物质来源主要受海平面升降的控制；阶段Ⅲ（8~0 ka BP）主要来源于长江和台湾，黄河贡献有限，主要受黑潮演化的影响。CS2站（蒙脱石+高岭石） （/伊利石+绿泥石）比值可以作为东亚季风演化的矿物学指标，指标变化显示出东亚冬季风强度相对夏季风的强度在16.4~14.8 ka BP和12.8~11.6 ka BP期间有两次显著的加强，指示当时气候相对寒冷干燥，结果可以与格陵兰冰心δ¹⁸O和三宝洞δ¹⁸O记录等很好对比。  相似文献